HomeJapan → Australia
Do I need an adapter from Japan to Australia?
You need a Type I adapter for Australia.
Japan: Type A/B, 100 V, 50 / 60 Hz → Australia: Type I, 230 V, 50 Hz.
Dual voltage (100–240 V input) covers 230 V. Type A/B plugs do not fit Australia's Type I sockets. Pack a Type I adapter.
Dual voltage (100–240 V input) covers 230 V. Type A/B plugs do not fit Australia's Type I sockets. Pack a Type I adapter.
Single-voltage device (100 V) on a 230 V supply. A plug adapter alone will damage it; you need a voltage converter, or a dual-voltage model. You will also need a Type I plug adapter.
Some models are dual voltage and some are not. Check the INPUT line on the charger: 100–240 V works on 230 V with just a plug adapter; a single voltage needs a converter. Type A/B plugs do not fit Australia's Type I sockets. Pack a Type I adapter.
Some models are dual voltage and some are not. Check the INPUT line on the power supply: 100–240 V works on 230 V with just a plug adapter; a single voltage needs a converter. Type A/B plugs do not fit Australia's Type I sockets. Pack a Type I adapter.
Single-voltage device (100 V) on a 230 V supply. A plug adapter alone will damage it; you need a voltage converter, or a dual-voltage model. You will also need a Type I plug adapter.
What to buy for Australia (on amazon.co.jp)
Some links on this site are affiliate links: if you buy through them we may earn a small commission at no extra cost to you.
Why
Plug shape. Japan uses Type A (two flat parallel pins) and Type B (two flat parallel pins and a round earth pin). Sockets in Australia are Type I (two flat pins in a V shape and a flat earth pin). They are not compatible, so you need a plug adapter.
Voltage. Japan is 100 V; Australia is 230 V. Different voltage families. Dual-voltage devices (INPUT 100–240 V) are fine; single-voltage devices need a converter or will be damaged. Adapter or converter?
Frequency. Japan is 50 / 60 Hz; Australia is 50 Hz. No change to worry about.
Australia: Australia's nominal supply is 230 V (AS 60038) although many areas still measure close to 240 V; either way it is in the same band as Europe. Sockets are Type I only. The same Type I plug is used in New Zealand, and fits sockets in China, Argentina and Papua New Guinea.
Japan: Japan runs on 100 V nationwide, lower than anywhere else. The frequency is split: 50 Hz in eastern Japan (Tokyo, Yokohama, Sapporo, Sendai) and 60 Hz in western Japan (Osaka, Kyoto, Nagoya, Hiroshima, Fukuoka). Sockets are mostly ungrounded Type A; grounded Type B sockets are uncommon outside newer buildings, so a US three-pin plug may need a 3-to-2 adapter. Japanese Type A pins are the same width, so a polarised US plug (one wide blade) may not fit an older Japanese socket.
Frequently asked questions
Do I need an adapter from Japan to Australia?
Yes. Japanese plugs are Types A and B and sockets in Australia are Type I, so you need a Type I adapter.
Do I need a voltage converter from Japan to Australia?
Only for single-voltage appliances. Japan is 100 V and Australia is 230 V, so a Japanese hair dryer, straightener or kettle needs a step-down converter (or a dual-voltage model). Phones, laptops and chargers marked INPUT 100–240 V just need the plug adapter.
Will my Japanese phone charger work in Australia?
Yes. Phone and laptop chargers are dual voltage (100–240 V). You only need a Type I plug adapter.
What about the reverse trip, Australia to Japan?
You need a Type A adapter for Japan, plus a voltage converter for your hair dryer or straightener. Full Australia to Japan guide.